CX-100 Aziridine crosslinking-agent

• Post Date:

  Jun 19,2015

• Expiry Date:

  Dec 16,2015

• Detailed Description:

  Cas No. :64265-57-2. Specs:5kg
  Price:21 USD Kilograms
  DESCRIPTION
  Crosslinker ZN-100 is a polyfunctional aziridineliquid crosslinker. Addition of 1-3% to water based acrylic emulsions or urethane dispersions produces a marked improvement in water, chemical, abrasion and humidity resistance and enhances adhesion to specific substrates.
  
  SPECIFICATION
  Appearance: colorless to pale yellowish liquid;
  Total solids (w/w %) > 99;
  Molecular Formula & Weight: C24H41N3O6, 467.67;
  CAS NO.: 64265-57-2;
  Viscosity Brookfield (25°C): 180-220 mPa.s;
  pH (25°C): 8.0-10.5;
  Density (20°C): 1.08 kg/l;
  Freezing Point: <-15°C.
  
  APPLICATION
  In water based parquet lacquers to improve water, alcohol, detergent, chemical and abrasion resistance;
  In water based industrial wood-, plastic- and metal coatings to increase water, alcohol and block resistance;
  In vinyl coatings to reduce plasticizer migration and improve stain resistance;
  In water based concrete sealers to improve abrasion resistance;
  Generally, to improve adhesion of water based systems to non-polar substrates;
  In solvent based polymers to increase resistance properties;
  In water based printing inks to improve water and detergent resistance.
  
  FORMUlATING GUIDELINES
  Crosslinker XC-113 is a tri-functional material that crosslinks polymers with reactive carboxyl functionalily; Typical addition levels of XC-113 necessary to fully crosslink acrylic emulsions and urethane dispersions are 2% and 3% respectively; Crosslinker XC-113 should be added to lacquers, paints or inks prior to use and due to its excellent water miscibility it can be stirred in by hand; The best method of addition is by using a 1:1 premix of XC-113 and water; In water borne formulations, XC-113 will slowly hydrolyse and blends should therefore be used within 1-2 days after preparation; The hydrolised products have no adverse effects on the emulsions nor on the dried films, and additional crosslinker may be added to restore reactivit; Solvent based systems modified by the addition of XC-113 must be used within 5 days because they tend to thicken and may gel within 2 weeks.
  
  HANDLING
  Care must be taken to avoid any contact with the skin and eyes. When used in spray applications, particular care must be taken to avoid oral and/or nasal ingestion by wearing a suitable respirator. When handling XC-113 it is desireable to prevent inhalation of vapours by proper ventilation or respirator use.
  
  PACKAGE & STORAGE
  Available 4*5Kgs plastic pails and 25Kgs steel drums with inner plastic pails. Store in a cool, dry, dark place. If stored under conditions of excessive heat for extended periods the material may discolour, deteriorate and gel.
  

• CAS Registry Number:

  64265-57-2.

• Company:

  Guangzhou zono trading company co，Ltd         

• Contact:

  soulpunk hoang

• Tel:

  13805753638

• Fax:

  86-020-32208191

• Email:

  610942158@qq.com